Compact and Active USB Audio Interface

INFRASONIC, a leading worldwide provider of digital musical instruments is proud to introduce our newest product,
the AMON USB recording interface.
This AMON is a two channel USB interface that can features a high quality microphone preamp,
a line level/instrument input, and MIDI I/O.

One reason our AMON is so suited to portable recording is because the AMON is USB bus powered.
This means that the AMON requires no extra power cables or wall warts and that its power is provided by the USB cable.
The USB 2.0 connection supports data transfer speeds of up to 480Mbps for effortless recording
and the signal to noise ratio is in excess of 100dB.

With a full list of features and a reasonable price, the AMON is one of today¡¯s best values in USB interfaces.
Like all of INFRASONIC¡¯s products, the AMON comes with a 1 year manufacturer¡¯s warranty.
   

¡Ü 2-in/2-out USB 2.0 High-Speed audio interface
¡Ü MIC pre-amp (TRS phone jack) with peak LED, gain control
¡Ü Line/Hi-Z input (TS phone jack) with peak LED, gain control
¡Ü 2 unbalanced inputs with RCA jack
  - A/D converter: SNR 102dBA @ (48 kHz)
¡Ü 2 unbalanced outputs with RCA jack
   - D/A converter: SNR 108dBA @ (48 kHz)
¡Ü Supports up to 24-bit/96kHz
¡Ü 1 x MIDI I/O
¡Ü Small design featuring a heavy duty aluminum case
¡Ü Bus-powered with USB link LED
¡Ü Supports zero latency direct hardware monitoring
¡Ü ASIO2.0, MME, DirectSound and Core Audio supports
¡Ü Windows¢ç XP/VISTA or later, Mac OS 10.3 or later
¡Ü Native Instruments ABSYNTH 4 DEMO, MASSIVE DEMO and TRAKTOR 3 DEMO software included


Minimum system requirements

<PC>
Intel Pentium 4 or equivalent and
Compatible CPU
512MB of RAM
One available USB port
Microsoft Windows¢ç XP/VISTA or later

<Mac>

Macintosh with G4 or better processor
512MB of RAM
One available USB port
Mac OS 10.3 or later

 

 

What¡¯s in the box

¡Ü AMON Hardware
¡Ü Installation CD with the driver
  and Native Instruments DEMO software
¡Ü Standard USB cable
¡Ü User¡¯s Manual
 

 

1. Microphone or Left Line Input Gain Control
2. Microphone Peak LED
3. Microphone Input (1/4¡± TRS)
4. Hi-Z input (1/4¡± TS)
5. Hi-Z input Peak LED
6. Hi-Z or Right Line Input Gain Control
7. Headphone Output8. Headphone Level Control


 
  1. Microphone or Left Line Input Gain Control
2. Microphone Peak LED
3. Microphone Input (1/4¡± TRS)
4. Hi-Z input (1/4¡± TS)
5. Hi-Z input Peak LED
6. Hi-Z or Right Line Input Gain Control
7. Headphone Output8. Headphone Level Control
 
 
 

There are many types of devices to connect to the AMON.
The unit can be set to correspond with the varying impedances of third party devices.

 

 

[ANALOG AUDIO]

  SAMPLE RATE SUPPORTS   44.1, 48, 88.2, 96 kHz

  ANALOG LINE INPUT
  Input type   Line input 1,2
  Connector type   1/4" TS phone jack
  Peak level   0dBFS @ +6dBV
  Impedance   About 10K§Ù

  MIC INPUT
  Input type   MIC input for dynamic microphone
  Connector type   1/4" TRS phone jack
  Preamp gain   +60dB (TBD)
  Peak level   0dBFS @ 20Mv
  Impedance   About 1K§Ù

  Hi-Z INPUT
  Input type   High impedance input for instrument
  Connector type   1/4" TS phone jack
  Peak level   0dBFS @ +0dBV
  Impedance   About 1M§Ù

  ANALOG OUTPUT
  Output type   Line output 12
  Connector type   1/4" TS phone jack
  Peak level   +0dBV @ 0dBFS
  Attenuation   -64dB ~ +0dB(0.5dB step size)
  Impedance   Less than 30§Ù

  HEADPHONE OUTPUT
  Output type   Headphone amplifier
  Connector type   1/4" TRS(stereo) phone jack
  Load impedance range   32-300§Ù (for the best performance)
  Output power   60mW @ THD<0.1% ; Vpp = 3.5V

[DIGITAL AUDIO]

  SAMPLE RATE SUPPORTS   44.1, 48, 88.2, 96 kHz

  A/D Converter
  SNR   108dBA(0dB @ fs=48kHz)
  Dynamic range   108dBA
  THD   -97dB(1kHz, 0dBFS)
  Interchannel Isolation   100dB


  D/A Converter
  SNR   108dBA(0dB @ fs=48kHz)
  Dynamic range   108dBA
  THD   -97dB(1kHz, 0dBFS)
  Interchannel Isolation   100dB


[INTERFACE]

  INTERFACE
  USB   USB2.0 high speed format
  MIDI   MIDI in and MIDI out ports (DIN-5pin)